1) Create a remote control for the camera. Since there is no build-in version, so we need to open the camera case and add some wires for external access. I will attach a jack to the body,
to add flexibility for setup and transport, also to allow to use the cameras individually.
2) Create a base plate with 10 tripod-heads, this gives some manual way for fintetuning the individual camera positions.
3) Create an external piece of electronic, a multiple trigger, that fires the 10 cameras at the same time. Optional use a remote control kit to trigger from a distance.
4) Use the camera with 10 memory cards, download and batch-rename the pictures to allow automatic stitching in PTGUI.
to add flexibility for setup and transport, also to allow to use the cameras individually.
2) Create a base plate with 10 tripod-heads, this gives some manual way for fintetuning the individual camera positions.
3) Create an external piece of electronic, a multiple trigger, that fires the 10 cameras at the same time. Optional use a remote control kit to trigger from a distance.
4) Use the camera with 10 memory cards, download and batch-rename the pictures to allow automatic stitching in PTGUI.
Keine Kommentare:
Kommentar veröffentlichen